Diy Kitchen Table For Two People

Author: aslan | Categories: FURNITURES comments
Diy Kitchen Table Solid

Diy Kitchen Table – A table for two people fits in a breakfast nook or a small patio. Making your own table can save you a lot of money, depending on the type of wood you choose. Reasonably affordable are cedar, fir or pine. However, if you want a cherry or teak table, the wood can be expensive. Sand all the wooden components for the kitchen table. Form the side and end aprons in a rectangle; two planks of wood from 1 by 4 inches to 32 inches and two to 22 inches in length, respectively.

The final aprons should be on the inside edge of the side aprons to make the corners. Check with a carpenter’s square that the corners are true right angles, and then hold the diy kitchen table rectangle together. Drill two countersunk pilot holes through the side aprons at the ends of the end aprons below and secure with 2-inch wood screws. Insert four 2-by-2-inch wooden planks, spaced evenly between the side aprons.

Place two table boards of wood side-by-side 36 1-by-12 side by side on a work surface, ensuring the ends of both boards are even and the top face of the planks face down. Bead a line of glue on the bottom edges of the aprons and the support boards. Place the apron and the rectangle plank support over the best diy kitchen table planks and place it so that it is not 2 inches above the overlapping board on each side of the apron and one inch above each apron end.

Comments are closed.